optris PI 200 Operator's Manual page 53

Electrical Installation
Figure 31: Configuration Standard Process Interface (PIF)
The standard process interface provides the following inputs and outputs:
Name Description
AI Analog input
DI Digital input
(active-low = 0...0,6 V)
AO Analog output
Alarm output
1)
Depending on supply voltage; for 0-10 V on the AO the PIF has to be powered with min. 12 V.
2)
The AI is designed for max. 24 V, the voltage level above 10 V is not interpreted
max range 1) / status
0-10 V 2)
24 V
0-10 V
0/ 10 V
53-