Adjusting The White Balance - JVC JY-HM360E Instructions Manual

Adjusting the White
Balance
Adjust the white balance according to the color
temperature of the lighting. You can select the
adjustment mode according to the shooting
conditions.
As the color of the light (color temperature) varies
according to the light source, it is necessary to
readjust the white balance when the main light
source illuminating the subject changes.
WHT BAL SHUTTER
B
A
PRESET
.
Automatic White Balance Mode (FAW:
Fulltime Auto White balance)
Press the [WHT BAL] button on the side control
0
panel to enter into Automatic White Balance
mode.
Set the [FULL AUTO ON/OFF] switch on the
0
camera recorder to "ON" to enter Automatic
White Balance mode. An appropriate white
balance is automatically adjusted according to
the color temperature of the lighting on the
object.
White balance switching with the [WHT BAL
0
B/A/PRESET] selection switch is disabled.
Caution :
The accuracy of [FAW] is inferior to that of Auto
0
White Balance.
When the power of the camera recorder is
0
turned on with the [FAW] mode selected, it takes
about 15 seconds for the colors to stabilize.
FULL AUTO
ON
OFF
Memo :
When [Main Menu] B [Camera Function] B [User
0
Switch Set] B [AE Lock] is set to "AE/WB", the
white balance when the user button that is
assigned [AE Lock] is pressed can be fixed.
(A P91 [ AE Lock ] )
If [White Balance] has been assigned to the user
0
button, pressing the assigned user button will
display the FAW Paint Adjustment screen.
(A P34 [Assignment of Functions to User
Buttons] )
FAW Paint Adjustment
You can fine-adjust the white balance that was
automatically adjusted.
1 Select [Main Menu] B [Camera Process] B
[White Balance] B [FAW Paint] and press
the Set button (R).
The FAW Paint Adjustment screen appears.
.
2 Adjust the R and B values.
Use the cross-shaped button (JK) to adjust R
value and (HI) to adjust B value.
.

Adjusting the White Balance

1
53