Camera Process Menu - JVC JY-HM360E Instructions Manual

Expanded Focus
For specifying the operation when any of the
[USER1]-[USER7], [LCD KEY▲], [LCD KEY▶],
[LCD KEY▼], or [LCD KEY◀] items is set to
"Expanded Focus".
Toggle:
0
Pressing the button assigned with "Expanded
Focus" each time switches the "Expanded
Focus" function to on or off.
Momentary:
0
The "Expanded Focus" function is enabled
during the interval while the button assigned with
"Expanded Focus" is pressed.
Limited Time:
0
Activates the timer.
During autofocus, the [Expanded Focus] feature
turns off about 3 seconds after it is turned on.
During manual focus, the [Expanded Focus]
feature turns off about 3 seconds after you stop
operating the focus/zoom ring.
[Setting Values: RToggle, Momentary, Limited
Time]
9 Ring
For setting the focus/zoom ring operation.
SW Set:
0
This follows the settings of the [FOCUS/
ZOOM] operation switch.
Focus:
0
When the Expanded Focus function is activated,
focusing operation is possible regardless of the
settings of the [FOCUS/ZOOM] operation
switch.
[Setting Values: RSW Set, Focus]
92
Camera Function Menu

Camera Process Menu

Menu screen for adjusting the quality of camera
images.
This item cannot be selected in the Media mode
and Scene Select mode.
Detail
For adjusting the contour (detail) enhancement
level.
Increasing the value increases the sharpness of
the contour.
[Setting Values: -10 to +10, Off (R0)]
9 Adjust...
For specifying the detailed settings of the contour
(detail).
(A P94 [Detail/Adjust Item] )
Memo :
This item cannot be selected when [Detail] is set
0
to "Off".
Master Black
For adjusting the pedestal level (master black) that
serves as the reference black.
Increasing the value increases the pedestal.
[Setting Values: -50 to +50 (R0)]
Black Toe
Process the dark areas according to the balance of
bright and dark areas in the image to adjust the
overall balance of contrast.
For altering the gain of dark areas. Adjust this item
according to the condition of the captured video
signals.
Stretch:
0
Increases the gain of dark areas in an image to
stretch the signals of these areas only, thereby
showing the contrast between bright and dark
areas more clearly.
Specify the amount of stretch with [Stretch
Level].
Normal:
0
Normal condition.
Compress:
0
Compresses the gain of dark areas to increase
the contrast when the entire image appears
bright and contrast is weak. Specify the
compression amount with [Compress Level].
[Setting Values: Stretch, RNormal, Compress]