Make Changes To Installer Setup - Honeywell Home TH8110R1008/U Manual

Table 2. Installer Options.
Menu Item
Installer Setup Select INSTALLER SETUP to set system
settings one by one.
Installer Test Select INSTALLER TEST to quickly
determine if the heat, cool, fan and
thermostat are operating properly.
Minimum off timers are ignored during
the test.
Data Logs Select DATA LOGS to turn off/on the
Alerts Log or Interaction Log.
Wireless Select WIRELESS MANAGER to add,
Manager remove, rename or view the connected
wireless accessories.
Reset To Select RESET TO DEFAULTS to place all
Defaults thermostat settings back to the factory
settings.
Note: If the thermostat has been setup
WITHOUT an Equipment Interface
Module or the TrueZONE Wireless
Adapter and you would like to add one,
you must reset the thermostat back to
factory defaults.
Device Info For Resideo use only.
NOTE: You can use the thermostat microSD port to down-
load all Installer Setup settings, including your
company name and contact information. You can
upload this data to each thermostat you install, to
save time.

Make Changes to Installer Setup

NOTE: Use a microSD card to save set up time. See "To
Use the MicroSD Card in the Thermostat" on
page 102.
1. Touch Menu.
2. Select Installer Options.
ISU Installer Setup
Number Name
Residential
101 Application
Commercial
1-16
102 Zone Number
[Select Thermostat Name]
103 Thermostat Name
Non-Programmable
104 Thermostat Type
Programmable
Fahrenheit
105 Temperature Scale
Celsius
Description
Table 3. Installer Setup (ISU) Table.
Settings Default
Residential
1
Thermostat
Programmable
Fahrenheit
Installer Options
3. Enter password (date code) and touch Done. See
"Finding Your Password (Date Code) to Access
Installer Options" beginning on page 20 for more
information.
Enter password
4. Select Installer Setup.
Installer Setup
Installer Test
5. Follow prompts on the screen to select the desired
setup options. See Table 3 for Installer Setup options.
Residential,
Commercial Requires
or Both EIM
Both No
Both No
Both No
Both No
Both No
21
®
VISIONPRO 8000 WITH REDLINK™
MCR33976
Fig. 61.
0 0 0 0
MCR33977
Fig. 62.
MCR34015
Fig. 63.
Notes
This ISU is only displayed on a thermostat that is
controlling a zone panel through the THM4000
Wireless.
The Portable Comfort Control remote and Web
Interface displays the name of the thermostat that
you enter on this screen.
68-0312—07