Remove Coin Cell Battery Tab; Mounting Thermostat On Wallplate; Power Optional Redlink™ Accessories - Honeywell Home TH8110R1008/U Manual

CONVENTIONAL
C
K
RC
R
U1
U1
U2
U2
HEAT PUMP
Fig. 19. Thermostat wired directly to equipment.
IF THE THERMOSTAT IS USED WITH AN EQUIPMENT
INTERFACE MODULE OR TRUEZONE WIRELESS
ADAPTER
1. Power the thermostat using Rc and C terminals or
with batteries. Refer to Fig. 20.
NOTE: The relay outputs and inputs on the thermo-
stat do not function when used with an
Equipment Interface Module or TrueZONE
Wireless Adapter.
CONVENTIONAL
C
K
RC
R
U1
U1
U2
U2
HEAT PUMP
Fig. 20. Inserting wires in thermostat terminal block.

Remove Coin Cell Battery Tab

1. Remove tab to activate coin cell battery.
NOTE: Coin cell battery saves time and date during a
power loss.
S1 S1
S1 S1
W O/B
Y Y
G G
W2 AUX
-E
Y2
Y2
A
L/A
S1 S1
S1 S1
W O/B
Y Y
G G
W2 AUX
-E
Y2
Y2
A
L/A
13
VISIONPRO
Fig. 21. Remove coin cell battery tab.

Mounting Thermostat on Wallplate

1. If your thermostat has hinges along the bottom and a
button on the top, align the thermostat at the bottom
and snap into place as shown. If you have the
updated model without hinges, line the thermostat
up evenly with the wallplate and push the thermostat
evenly along the sides and bottom to snap it into
place.
Fig. 22. Mount thermostat.
POWER OPTIONAL REDLINK™
ACCESSORIES
Outdoor air sensor
1. Install 2 fresh AA lithium batteries.
Fig. 23.
®
8000 WITH REDLINK™
MCR32937
68-0312—07