Installer Setup - Honeywell Home THR860S User Manual

Installer setup

Press and hold both
SET INSTALLER OK?
Press OK to begin
CLOCK MODE
1 :
Function
number
+
Press or
24 hour
1 :
Function
number
12
Setting
-
to change setting
24
Setting
Installer settings allow you to customise how your system
works. Check the table to see if any settings need to be
changed.
To change installer settings:
1 Set slider to RUN.
2 Press and hold the OK and - buttons together until the
screen displays "Set Installer OK?" Press OK to enter
installer setup mode and continue.
3 Press OK repeatedly to scroll through functions until
you find one you want to change.
4 Press the + or - buttons to change any setting, then
press OK to save the new setting and advance to the
next function.
To exit installer setup at any time, move the slider up,
then back down to the RUN position.
21