System Installation; When Installing This Product; Finding Your Password (Date Code) - Honeywell Home TH8110R1008/U Manual

SYSTEM INSTALLATION

When Installing this Product...

1. Read these instructions carefully. Failure to follow the
instructions can damage the product or cause a haz-
ardous condition.
2. Check the ratings given in the instructions to make
sure the product is suitable for your application.
3. Installer must be a trained, experienced service
technician.
4. After completing installation, use these instructions
to verify the product operation.

Finding Your Password (Date Code)

You will need the thermostat password to:
• Add or remove RedLINK accessories
• Make changes to Installer Setup
• Perform an Installer Test
• Reset Thermostat to Factory Default Settings
The password (date code) is located on the back of the
thermostat (see Fig. 4)
Fig. 4. Finding thermostat password.
You can also find the password (date code) by pressing
MENU, selecting Dealer Information and then scrolling
down to see the Date Code.
7
®
VISIONPRO 8000 WITH REDLINK™
RoHs Compliant
Conformité RoHs
Assembled in Mexico
Assemblé au Mexique
1
M37810A
Password
(Date Code)
68-0312—07