Entering Programming Mode; Exiting Programming Mode - Rosslare AYC-E60B Installation And Programming Manual

Reader Operation
4.2.1

Entering Programming Mode

To reach the Programming Menu System, the unit must first be
placed into Programming mode.
• The factory 4-digit Programming code is 1234.
• If a Programming code is not entered within 30 seconds, the unit
returns to Standby mode.
To enter Programming mode:
1. Press # four times.
The left LED turns off and the right LED turns
red.
2. Enter your 4-digit Programming code.
If the Programming code is valid, the right LED
turns green.
If the Programming code is invalid, you hear a long beep and the
reader returns to Standby mode.
4.2.2

Exiting Programming Mode

To ex it Programming mode:
1. Press # to exit Programming mode at any time.
 You hear a beep.
The left LED turns red and the right LED

turns off.
This indicates that the unit has returned to Standby mode.
Wrong entries may reset the reader back to Standby mode. If no
key is pressed for 30 seconds while in Programming mode, the
unit exits Programming mode and returns to Standby mode.
22 AYC-E/Q60 Series Installation and Programming Manual
Green
Red