Pitney Bowes FastPac DI950 Operator's Manual page 106

5 • Troubleshooting
Problem
Wrong fold type.
Fold panel length incorrect.
Address not showing in
envelope window.
5-14
Table 5-9 Mail Piece Problems
Cause
Job is set up incorrectly.
Job is set up incorrectly.
• Item loaded incorrectly.
• Lead edge is not in the
lead position.
Job is set up incorrectly.
Action
Check job definition and make appropriate adjustments
to meet job specifications.
Select automeasure, or make manual adjustments to
meet job specifications, then rerun Trial Piece.
• Reload item. Refer to Loadng Trays in Chapter 3
of this guide.
• Ensure lead edge is in correct position, as
indicated in the loading instructions on the display
screen.
• On Trial Piece Complete screen, press "Adjust
Address" and follow the instruction that appear.
Ensure the item with the address is personalized, and
the correct address location is selected. Also, ensure
the selected envelope type is "window" and the flap
orientation is correct. If necessary, refer to Edtng a
Job in Chapter 3 of this guide.
SV61311 Rev. E