IUH-F190-V1-*, IUT-F190-R4-V1*
Troubleshooting
8
Troubleshooting
Problem
Interference from
several read/write
heads in the direct
vicinity
Status A message
66
Solution
Use the multi-plex mode of the IDENTControl control interface
Change the setting of the transmission channels
Reduce the transmission power
Check whether there are multiple tags in the detection range:
Remove the tag from the detection range by placing the tag e.g. in a
sealed metal container
Repeat the read or write operation
Use filter commands
Determine whether multiple tags have the same UII/EPC