Table of Contents
Advertisement
IUH-F190-V1-*, IUT-F190-R4-V1*
Product Description
UHF wavelength: 866 MHz
Radiated Power: 3
Channel bandwidth: 200 kHz
Channel spacing: 200 kHz
Frequency access method: programmable frequency list
Number of predefined channels: 10
Programmable channels: 1, 2, 3, ... 10
Center frequencies: 866.1 MHz, 866.3 MHz, 866.5 MHz, 866.7 MHz, 866.9 MHz,
867.1 MHz, 867.3 MHz, 867.5 MHz, 867.7 MHz, 867.9 MHz
Up to ten channels can be parameterized and used in sequence.
Default: dense reader mode on channel 1, 7, 4, 10. See chapter 3.2.6.
In Singapore, the use of RFID in the UHF range of 920 MHz to 925 MHz is regulated as follows.
UHF wavelength: 920 MHz ... 925 MHz
Radiated Power: 3
Channel bandwidth: 500 kHz
Channel spacing: 500 kHz
Frequency access method: frequency hopping spread spectrum. See chapter 3.2.7.
Number of channels: 10
Channels used: 1, 2, 3, ... 10
Center frequencies: 919.75 MHz + (M x 0.5) MHz
All 10 channels are always used.
3.3.16
South Korea
In South Korea, the use of RFID in the UHF range is regulated as follows:
UHF wavelength: 917.2 MHz
Radiated Power: 3
Channel bandwidth: 200 kHz
Channel spacing: 600 kHz
Frequency access method: frequency hopping spread spectrum. See chapter 3.2.7.
Number of channels: 6
Channels used: 1, 4, 7, 10, 13, 16
Center frequencies: 917.1 MHz + (M x 0.20) MHz
All 6 channels are always used.
3.3.17
Thailand
In Thailand, the use of RFID in the UHF range is regulated as follows:
UHF wavelength: 920 MHz ... 925 MHz
Radiated Power: 3
Channel bandwidth: 500 kHz
Channel spacing: 500 kHz
Frequency access method: frequency hopping spread spectrum. See chapter 3.2.7.
868 MHz
500 mW
; Default = 50 mW
ERP
800 mW
; Default = 80 mW
ERP
920.4 MHz
1250 mW
; Default = 125 mW
EIRP
1250 mW
; Default = 125 mW
EIRP
ERP
ERP
EIRP
EIRP
21
Advertisement
Table of Contents
