Table of Contents
Advertisement
To change the Time Out period, enter the new value (with no point
or comma, e.g. 5 corresponds to 5 minutes), then press
confirm.
To return to the Supervisor Ready screen press
Motor Timeout
From the SETUP screen select MOTOR TIMEOUT and press
to confirm, the following screen will be observed:
MOTOR TIMEOUT
ESC
To return to the previous screen with the Setting unchanged, press
.
Use the
and
to confirm.
To return to the Supervisor Ready screen press
Key Beep
From the SETUP screen select KEY BEEP and press
confirm, the following screen will be observed:
KEY BEEP
ESC
To return to the previous screen with the Setting unchanged, press
.
Use the
and
to confirm.
To return to the Supervisor screen press
82
Supervisor settings
1
LONG
2
MEDIUM
3
SHORT
keys to change the setting, then press
1
ON
2
OFF
keys to change the setting, then press
to
twice.
OK
twice.
to
OK
twice.
Advertisement
Table of Contents
