Franking With Autofeed - Neopost IJ-60 User Manual

5.

FRANKING WITH AUTOFEED

Used in conjunction with the IJ-35/40/45/50/60, the Automatic
Feeder permits a large range of envelope sizes and thicknesses to
be processed.
Envelope feeding
Check that all envelopes have been sorted into stacks of same size
with the address facing upwards and the top edge of the envelopes
all the same side of the stack.
Fan the envelopes to separate them
Bevel the edge of the stack
Take the stack and place it on the platform, address side upwards
with the top edge against the left-hand side as shown.
Move the rear guide forward until the edge of the envelope aligns
with the face of the guide. Move the side guide towards the
envelope leaving sufficient clearance to allow the envelope to move
freely.
Franking with autofeed 37