Daewoo Solar 300LC-V Manual page 593

• Work mode: Digging mode
• Auto idle: "ON" (Selection state)
3. The above mentioned two statuses are applicable to normal condition of an e-EPOS controller.
4. Under the abnormal condition of an e-EPOS controller, communication cable or instrument
panel failure, "Failure code: 82" can be generated.
Information of Machine Operation
Accumulated operation hour of each mode and status is displayed.
1. Operating Hour Information
A. Entering Sub-menus: When a cursor
is located in "Operating Info" of
special menu screen (Figure 37)
press enter button(
18) and "Operating Info" screen will
be displayed (Figure 38).
B. Information
operation (Figure 38).
C. Operation Hour Screen
D. Exiting Sub-menus: If escape button
(ESC, 4 on Figure 18) is pressed for
more than 1 second, this information
screen will be returned to previous
screen.
Electrical System
, 3 on Figure
screen of machine
SPECIAL MENU
Machine Info
Failure Info
Operating Info
Figure 37
OPERATING INFO
Operating Hrs
Reset Hrs
Figure 38
OPERATING HRS
1. Power
2. Trenching : 0190 Hr
3. Auto Idle : 0227 Hr
Figure 39
1
2
3
ARS0990L
ARS1000L
: 0345 Hr
ARS1330L
S0802220K
Page 39