Daewoo Solar 300LC-V Manual page 306

10. Use second piston tool described at
beginning of this procedure to separate
piston. Detach cushion ring (15), taking
care not to damage cushion ring.
11. Use a plastic hammer to evenly pull off rod
cover (9) from end of piston rod. Be careful
not to damage rod bushing (6) and dust
wiper, U-packing and other seals.
12. Use a dull, rounded-tip tool to pry off O-
ring (11) and backup ring (12).
13. Find a screwdriver with an appropriate
width tip to facilitate removal of slipper seal
(19), wear ring (18) and slide ring (17)
from piston (16).
S0705000
Page 32
Figure 21
Figure 22
Figure 23
Figure 24
HAOF37OL
Cylinders