Electric Motor Installation - H-KING TIGER MOTH DH-82 Instructions Manual

3- Electric Motor installation

Using a aluminum motor mounting plate
as a template, mark the plywood motor
mounting plate where the four holes are
to be drilled.
Remove the aluminum motor mounting
plate and drill a 1/8"(3mm) hole through
the plywood at each of the four marks
marked .
3mm
5mm
5mm
Remove the wooden motor mounting plate and drill
a 5mm hole through the fire-wall at each of the four
marks marked .
3E
Attach the four 5x70mm bolts
and nuts to the fire-wall as shown.
3A
3B
3D
5x70mm bolt.....4
5mm nut..........12
5mm washer...16
Using a wooden motor mounting plate as a template,
mark the fire-wall where the four holes are to be drilled.
3C
! Align the mark on wooden motor
mounting plate with the mark on
the fire-wall.
3F
Secure the Motor to the wooden
motor mounting plate using the
four 3mm bolts.
3G
B
FIRE-WALL
B'
FUSELAGE - TOP VIEW
3mm bolt / nut...4
130mm
4