H-KING TIGER MOTH DH-82 Instructions Manual page 4

2- Engine installation
4x25mm screw - washer
...................4
3x25mm screw - washer
....................4
2B
2C
Note: Apply Silicon sealer to
each of the 3x25mm screw.
Reposition the engine mounts on to the fire-wall
and secure them with four 4x25mm screw.
2A
Reposition the engine on to the engine mounts so
the distance from the prop hub to the fire wall is
130mm.
- Mark the engine mounting plate where the four
holes are to be drilled.
Note: Mark the mounting plate through the engine
mounting flanges.
- Remove the engine and drill a 1/8"(3mm) holes
through the beam at each of the four marks made
above.
- Reposition the engine on the engine mount beams,
aligning it with the holes. Secure the engine to the
engine mount using four 1/8x51/64"(3x25mm)
screws.
FIRE-WALL
FUSELAGE - BOTTOM VIEW
130mm
3