Advertisement
Glue the 2 pcs horizontal fuselages using hot glue sticks.
Install the carbon strip on fuselage using foam glue.
Install 3 pcs different length carbon strips on upper
half vertical fuselage using foam glue.
Important: don't install bottom half vertical fuselage!
Install the carbon tube on fuselage using foam glue.
Install carbon strip and wood strip on horizontal tail
using foam glue. Then wait glue dried.
Assemble the vertical fuselage on horizontal fuselage
using hot glue sticks or foam glue or No.502 glue(for
indoor flying), make sure the motor mount location
must be flat!
2
Advertisement
