Electric Motor - H-KING PILATUS PORTER PC-6 Building Instructions

15- Electric motor

PC-6 Porter
- Using a plywood motor mounting plate as a template, mark the fire wall
where the four holes are to be drilled (12A).
- Remove the plywood motor mounting plate and drill a 13/64"(5mm) hole
through the fire-wall at each of the four marks marked (12B).
- Using a aluminum motor mounting plate as a template, mark the
plywood motor mounting plate where the four holes are to be drilled (12C).
- Remove the aluminum motor mounting plate and drill a 1/8"(3mm) hole
through the plywood at each of the four marks marked (12D).
12E
12F
12H
B
B=B'
B'
Firewall
123~125mm
Motorspant
SIDE-VIEW
Plywood motor mounting plate
Sperrholztrager Platten
12A
Montagekreuz aus
Alu (nicht enthalten)
Aluminum motor
mounting plate
! Align with the marks
An den Markierungen ausrichten
12G
12I
A
A=A'
A'
10
FRONT-VIEW
Vorderansicht
12B
5mm
! Align with the marks
An den Markierungen ausrichten
1/8"
3mm
12D
12C
5x70mm.......4
4mm.......x12
TOP-VIEW
Note the side thrust for motor!