Table of Contents
Advertisement
1. Installing the Printer Driver
By installing a printer driver on a computer, data created with the computer can be printed by the
product. You must first connect the product to a computer and then install the printer driver. The
installation method varies depending on how the computer and product are connected.
Printer Driver Operating Environment
A computer screen resolution of at least 1024 x 768 pixels is recommended. If it is lower than
that, part of the screen will not be displayed.
The printer driver supports the following OSs:
Windows 10, Windows 8.1, Windows 7,
Windows Server 2019, Windows Server 2016, Windows Server 2012, Windows Server 2012 R2,
Windows Server 2008 R2, and Windows Server 2008
Supported Connection Methods
The printer driver can be installed when the product is connected to a computer in one of the
following ways:
USB
LAN
RS-232C
IEEE1284
Process to Install the Printer Driver
The process to install printer driver is as follows:
1.
Prepare the printer driver
An installer is used to install the printer driver. Prepare the installer on a computer.
For details, refer to "1.1 Preparing the Printer Driver."
2.
Connect the product to the computer
Connect the product to the computer using one of the connection methods.
For details, refer to "1.2 Connecting the Product to the Computer."
3.
Install the printer driver
Install the printer driver on the computer.
When connected the product via USB or IEEE1284, refer to "1.3.1 Installing the driver when
connected via USB or IEEE1284."
When connected the product via LAN, refer to "1.3.2 Installing the driver when connected via
LAN."
When connected the product via RS-232C, refer to "1.3.3 Installing the driver when connected
via RS-232C."
4.
Set up the driver
Set up the installed printer driver as necessary.
For details, refer to the following sections:
"2. Setting Up the Printer Driver"
"3. Settings on the [Driver Settings] Tab"
"4. Settings on the [Configure Printer] Tab"
5
Advertisement
Table of Contents
