Network Configuration; Tcp/Ip - Bolin Technology SD500 Series User Manual

ii. Subsection By Size: Size of each recording file stored on the computer. For example, 5M.
b. When Storage Full
i. Overwrite Recording: When the assigned storage space on the computer is used up, the camera
ii. Stop Recording: When the assigned storage space on the computer is full, recording stops
4. Click Save.

Network Configuration

TCP/IP

Modify communication settings such as the IP address for the camera so that the camera can communicate with
other devices.
NOTE:

After you have changed the IP address, you need to use the new IP address to log in.

The configurations of DNS (Domain Name System) server are applicable when the device is accessed by
domain name.
1. Click Setup > Network > TCP/IP.
2. Select Static IP from the IP Obtain Mode
drop-down list.
3. Enter the IP address, subnet mask, and default
gateway address. Make sure that the IP address
of the camera is unique in the network.
4. Click Save.
If a gatekeeper or firewall is used in the network, Universal Network Passport (UNP) can be used to interconnect
the network, and the UNP server will assign an IP address to the connected cameras.
1. Select Enable for UNP Service.
2. In the UNP Server IP text box, enter an IP address for the
UNP server. Select Yes to enable authentication, and then
set the username and password for UNP authentication.
3. Click Save.
NOTE:

This function is not supported by some models, please see the actual model for details.
example, 2 minutes.
deletes the existing recording files to make room for the new recording file.
automatically.
21