Live View Toolbar - Bolin Technology SD500 Series User Manual

Live View Toolbar

NOTE:
The supported live view operations may vary with camera model. For the operations that your camera supports, see
the Web interface.
1. Play/stop live video.
2. Turn On/Off speaker.
3. Adjust the output volume for the media player on the PC.
4. Turn On/Off mic.
5. Adjust the microphone volume on the PC during audio communication between the PC and the camera.
6. Take a snapshot of the current image displayed on the PC. The path for saving snapshots is set in System
Configuration.
7. Start/stop local recording. The path for saving local recordings is set in System Configuration.
8. Start/stop audio communication between the PC and the camera.
9. Start/stop digital zoom. For more details, see
10. Start/stop Area Focus.
11. Start/stop 3D positioning. For more details, see
12. Show/hide the PTZ control panel.
13. Reset the packet loss rate to zero. After you move the mouse cursor on a live view window, this button
appears on the floating toolbar.
14. Collect/Expend Tool Bar.
15. Display packet loss rate and bit rate information in the bottom.
a. After you move the mouse cursor on a live view window, this button appears on the floating toolbar.
Click this icon to display the bottom information.
b. Click this icon again, the bottom information is displayed if the mouse cursor is moved on a live view
window or on the bottom information, and it hides automatically if the mouse cursor remains on a live
view window for 3 seconds or leaves the window.
16. Set the display ratio of the image.
a. Scale: display images by 16:9
b. Stretch: display images by window size
c. Original: display images in its original size
17. Select a live video stream that the camera supports: main stream, sub stream or third stream.
18. Click this button to open the image setting page.
19. Display in full screen mode.
Using Digital Zoom.
Using 3D Positioning.
49