Batch Mode Transmit Delay - Newland NLS-HR32-BT User Manual

Batch Mode Transmit Delay

Sometimes when multiple barcodes stored in the flash memory are sent to the host, the transmission of those barcodes is
too fast for the application to process. To program a transmit delay between barcodes, scan one of the following delays.
** No Transmit Delay (0ms)
Medium Transmit Delay (100ms)
Custom Transmit Delay (0-10,000ms)
Set the batch mode transmit delay to 200ms:
1. Scan the Enter Setup barcode.
2. Scan the Custom Transmit Delay barcode.
3. Scan the numeric barcodes "2", "0" and "0" from the "Digit Barcodes" section in Appendix.
4. Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
5. Scan the Exit Setup barcode.
51
Enter Setup
Short Transmit Delay (50ms)
Long Transmit Delay (150ms)
** Exit Setup