Good Read Vibration Duration
This parameter sets the length for the Good Read Vibration. It is programmable in 1ms increments from 1ms to 2,500ms.
Short (40ms)
Long (120ms)
Set the Good Read Vibration duration to 200ms:
1. Scan the Enter Setup barcode.
2. Scan the Custom barcode.
3. Scan the numeric barcodes "2", "0" and "0" from the "Digit Barcodes" section in Appendix.
4. Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
5. Scan the Exit Setup barcode.
29
Enter Setup
** Medium (80ms)
Custom (1 – 2,500ms)
** Exit Setup