Newland NLS-HR32-BT User Manual page 54

Enter Setup
** Whole Area Decoding
Acuread Decoding
If Specific Area Decoding is enabled, the scanner only reads barcodes that intersect the predefined decoding area.
The default decoding area is an area of 40% top, 60% bottom, 40% left and 60% right of the scanner's field of view
You can define the decoding area using the Top of Decoding Area, Bottom of Decoding Area, Left of Decoding Area
and Right of Decoding Area barcodes as well as numeric barcode(s) that represent(s) a desired percentage (0-100). The
value of Bottom must be greater than that of Top; the value of Right must be greater than that of Left.
Top of Decoding Area
Left of Decoding Area
** Exit Setup
Specific Area Decoding
Bottom of Decoding Area
Right of Decoding Area
38