Troubleshooting - Kalorik HUVI R1 Manual

Hide thumbs Also See for HUVI R1:
Table of Contents

Advertisement

Available languages

Available languages

RVC 50229 - VCS 51019
RVC 50229 - VCP 51824
RVC 50229 - VCP 51015

TROUBLESHOOTING

No.
Problem
1
HUVI is not
charging.
2
HUVI cannot
return to the
charging
base.
3
HUVI gets
stuck while
running and
stops
operating.
www.KALORIK.com
Self-Cleaning Station + Dust tank for self-cleaning
Replacement Filters – 6 Pack (6 HEPA + 6 Copper
Possible Cause
HUVI is not switched
on.
HUVI has not properly
connected to the
charging base.
The battery is
discharged.
The charging base is
not placed correctly.
HUVI has been
obstructed by
something on the floor
(cords, curtains, carpet
fringes, etc.)
31
station
Mopping Pads – 2 Pack
Filters)
Switch on HUVI.
Make sure HUVI's charging
contacts have connected to
the charging base's pins.
Re-activate the battery. To do
so, switch HUVI on. Place HUVI
on the charging station by
hand, then remove after
charging for 3 minutes.
Repeat 3 times, then charge
normally.
Refer to the BEFORE THE FIRST
USE section of this manual for
correct placement.
HUVI will try to free itself. If
unsuccessful, remove the
obstacles by hand and
Solution
restart.
220131

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rvc 50229 bk

Table of Contents