Troubleshooting - Kalorik HUVI R1 Manual

TROUBLESHOOTING

No. Problem
1 HUVI is not
charging.
2 HUVI
cannot
return to
the
charging
base.
3 HUVI gets
stuck while
running
and stops
operating.
4 HUVI
returns to
the
charging
base
before it
has
finished
cleaning.
www.KALORIK.com
Possible Cause
HUVI is not switched on.
HUVI has not properly
connected to the
charging base.
The battery is
discharged.
The charging base is not
placed correctly.
HUVI has been
obstructed by
something on the floor
(cords, curtains, carpet
fringes, etc.)
When the battery is low,
HUVI automatically
returns to the charging
base to recharge.
Working time van vary
depending on the floor
surface, room
complexity, and
cleaning mode selected
Make sure HUVI's charging
contacts have connected to
the charging base's pins.
Re-activate the battery. To do
so, switch HUVI on. Place HUVI
on the charging station by
hand, then remove after
charging for 3 minutes.
Repeat 3 times, then charge
Refer to the BEFORE THE FIRST
USE section of this manual for
correct placement.
HUVI will try to free itself. If
unsuccessful, remove the
obstacles by hand and
This is normal, no action
This behavior is normal, no
28
Solution
Switch on HUVI.
normally.
restart.
needed.
action needed.
211104