Troubleshooting - Kalorik VC 47706 Manual

2. Lift out post-motor HEPA filter.
3. Shake to remove dust. Wash the filter under running cold water.
4. Completely dry the filter before assembling.
Note: It is recommended to wash the HEPA filter after six months of
regular use, to maintain the vacuum's performance. If the HEPA filter
becomes heavily soiled, it is recommended to replace with a new filter.

TROUBLESHOOTING

ISSUE
Indicator lights
on the floor
head are
flickering
The floor head
does not work
Running time
shortened
www.KALORIK.com
POSSIBLE REASON
1. The rolling bar
is wrapped
2. Temperature is
too high or low
The floor head is
blocked by debris or
hair
1. Battery needs
to be
replaced
2. Ambient
temperature is
too high or too
low
3. Battery is not
fully charged
POSSIBLE SOLUTION
1. Clean the rolling
2. Move the vacuum
Ensure that no hair or other
thread is trapped around
the brush and check brush
area for larger debris
1. Contact the
2. Move the vacuum
3. Charge the battery
15
brush
to suitable
temperature
manufacturer to
replace the
battery at the
user's own cost
to suitable
temperature
VC 47706 - 201010