Kalorik HUVI R1 Manual page 12

― 3-ARM SET: The 3-Arm Set is designed for homes with small or light
rugs. The three-arm design makes it easier for HUVI to climb over
these surfaces and move freely across the floor. It is recommended
to use this set to avoid HUVI getting stuck on the sides of your
carpets or from moving your rugs around while cleaning.
• Place HUVI on the charging station by lining up the metal charging
contacts.
• Turn on your HUVI by pressing and holding the power button for 3-5
seconds.
• When successfully powered on, the power button lights up in blue.
• Allow HUVI to charge on the base. While charging, the indicator lights
on the POWER & HOME buttons flashes white. Once fully charged, the
lights stop flashing.
• Download the HUVI App and follow the instructions for complete set-
up. See CONNECTING TO THE HUVI APP section in this manual for more
information.
NOTE:
― Make sure HUVI is close to your WiFi router when connecting to the
HUVI app for the first time.
― For best results, make sure that your floor is free of any obstructions.
Remove any power cords and small objects from the floor that may
interfere with HUVI.
― Fold any tasseled edges of area rugs underneath to prevent
tangling.
www.KALORIK.com
HOME BUTTON
POWER BUTTON
12
220131