•
Make sure "AP Mode" is selected in the
upper right corner (Fig. G).
•
Press and hold the HOME button on top
of HUVI (Fig. H) until the HOME button
light turns light blue and begins to flash
slowly while HUVI says "connecting to
network".
•
Check off the small circle to the left of the text that
says "Confirm the indicator is blinking slowly", then
press "Next" (Fig. J).
•
Select "Go to Connect" in the app
interface (Fig. K)
•
You will be taken to the WiFi settings on
your smart device. Wait for the HUVI's
WiFi hotspot to appear, then connect
your smart device to the HUVI's WiFi
hotspot (Fig. L)
•
On your smart device, return to the app.
The app will show "Adding device..." as
the device connects.
•
Once successful, you will be able to name
your HUVI. Select "Done" in the app to
complete.
•
Your HUVI can now be controlled through
the HUVI app.
NOTE: If you cannot connect to WiFi using the connection methods above,
try the following before connecting again.
―
Restart your smart device
―
Reboot HUVI. Press and hold the power button for 3 seconds to
turn off. Wait 10 seconds, the press and hold the power button for
3 seconds again to turn back on.
Reboot your router by unplugging the router for 30 seconds, then
―
reconnecting. Allow the router a few minutes to reboot
Connecting with Amazon Alexa
HUVI is compatible with Amazon Echo's Alexa. Follow the steps below to
connect:
www.KALORIK.com
16
Fig. K
Fig. L
.
220131