Cleaing The Side Brushes; Replacing The Battery - Kalorik HUVI R1 Manual

• Clean the roller brush as well as the suction intake with the provided
cleaning tool or by hand to remove any debris or obstructions.
• Reinstall the roller brush by inserting the fixed protruding end first so that
the brush clicks into place.
• Reattach the sweep guard. Press down to snap it into place.
CLEANING THE SIDE BRUSHES
For optimal performance, clean the side brushes after a month of regular
use. Follow the instructions below to clean the side brushes.
• Remove the side brushes from the vacuum.
• Carefully remove any debris wrapped between the main unit and the
side brushes.
• Use a cloth dampened with warm water to remove any dust from the
brushes or to gently reshape them.
NOTE: the side brushes may slightly deform with regular use.

REPLACING THE BATTERY

• Use a screwdriver to remove the screws from the battery cover under
HUVI. Remove the battery from the compartment.
www.KALORIK.com
28
220131