Troubleshooting - Kalorik VC 46599 Manual

4. Remove the dust container from the vacuum cleaner by pressing
the release button (A) and taking out the dust container (B). See
the figure below for reference.
5. Turn the upper lid and remove it from the dust container (C). Take
the dust separation system and filter from the dust separation
system (D). See the following figure for reference.
6. Rinse the filter and the dust separation system thoroughly in
lukewarm water.
7. Allow the filter to dry thoroughly.
8. Mount the holders and filters in the reverse sequence.

TROUBLESHOOTING

ISSUE
The vacuum
cleaner will not
start.
Low suction
www.KALORIK.com
POSSIBLE REASON
Power cord is not
firmly plugged into
the outlet.
1. Dust container is
full.
2. Dust filter needs
cleaning or
replacement.
3. Power is low.
POSSIBLE SOLUTION
Check that the plug is
inserted firmly into the
electrical outlet.
1. Empty dust container.
2. Remove dust cup filter
and check for object(s)
in air duct and remove.
Clean or replace dust
filter.
3. Charge unit.
9
VC 46599 - 200605