Cleaning And Maintenance; Troubleshooting - Kalorik HVC 46818 Manual

CLEANING AND MAINTENANCE

Cleaning the dust container and filter
1. Make sure the unit is powered off.
2. Press the dust cup release button and remove the dust cup, as shown
below
Release
button
3. Remove the filter by pulling the metal ring attached on the filter and
then take out the metal net in the dust cup.
4. Clean the metal net with dry cloth and wash it if necessary.
5. Wash the dust cup and dry it gently with a dry cloth.
6. Take out the filter and tap it to remove the dust and large particles.
For deep cleaning, hand wash and reassemble after fully dried.

TROUBLESHOOTING

ISSUE
Vacuum turns off after
all 3 indicator lights
flash for approximately
4 seconds.
www.KALORIK.com
POSSIBLE SOLUTION
Check the filter and air duct for
blockages.
9
HVC 46818 - 200605