•
After setting a condition, select a task for HUVI (Fig. L) and follow the
onscreen instructions.
"Run the device" allows you to select which HUVI functions
o
to enable when automating.
"Select Smart" allows you to select an Automation or Tap-to-
o
Launch that you have previously created.
"Send notification" will send a notification to your smart
o
device when the condition you set is met.
"Delay" allows you to delay the start of the automation by a
o
specific amount of time.
•
After setting a task, you can add further conditions/tasks to your
automation if you desire. When ready, select "Save" to finalize (Fig.
M)
NOTE: Once created, "Automations" can be found by selecting
"Automations" in the Smart Screen (Fig. N). "Tap-to-Run" commands
can be found by selecting "Tap-to Run" section in the Smart Screen (Fig.
O).
Fig. L
AROMA DIFFUSER
HUVI has an aroma diffuser compartment, located above the vent on the
side of the vacuum.
www.KALORIK.com
Fig. M
24
Fig. N
Aroma diffuser
compartment
Fig. O
220131