To Connect In Ez Mode; To Connect In Ap Mode - Kalorik HUVI R1 Manual

To connect in EZ Mode (if Bluetooth is unsuccessful or not possible):
• Make sure the Bluetooth on your
smart device is off.
• Select "Add Device" (Fig. B), then
select the HUVI icon.
• Follow the instructions to input your
WiFi information (Fig. F), then
select "Next".
• Make sure "EZ Mode" is selected
in the upper right corner (Fig. G).
• Press and hold the HOME button
on top of HUVI (Fig. H) until the
HOME button light turns light blue
and begins to flash rapidly while
HUVI says "connecting to
network".
• Check off the small circle to the left
of the text that says "Confirm the
indicator is blinking rapidly", then
press "Next" (Fig. I).
• The app will show "Adding device..." as
the device connects.
• Once successful, you can name your
HUVI. Select "Done" in the app to
complete.
• Your HUVI can now be controlled
through the HUVI app.
To connect in AP Mode (if Bluetooth & EZ
mode connection are unsuccessful or not
possible):
• Make sure the Bluetooth on your
smart device is off.
• Select "Add Device" (Fig. B), then
select the HUVI icon.
• Follow the instructions to input your WiFi
information (Fig. F), then select "Next".
www.KALORIK.com
Fig. F
15
Fig. G
HOME
BUTTON
Fig. H
Fig. I
Fig. J
220131