Kalorik HUVI R1 Manual page 11

• Plug the power cord into the charging station, then into the outlet.
• Place the remaining cord behind the charging dock to prevent it from
getting in the way of HUVI as it cleans. NOTE: Always keep the charging
base plugged in, otherwise the vacuum will not automatically return to
it.
• Remove the foam inserts beside the bumper.
• Attach the side brushes to the bottom of HUVI by pressing the brush into
each slot until it clicks. Make sure to match the letter on the brush with
the letter on HUVI.
NOTE: HUVI is suitable for hardwood floors, tile, low pile carpet/rugs. HUVI
includes 2 unique sets of side arm brushes, each designed to tackle
different floor types and handle any room in your home.
― 6-ARM SET: designed for hard floors and whole-room carpeting,
permanently fixed onto the floor. The six-arm design provides more
lifting power for dust and hair, providing more efficient deep
cleaning on these surfaces.
www.KALORIK.com
11
220131