Dimensions And Mounting Methods - Emerson Unidrive M201 Installation Manual

Grommets must be installed to ensure ingress protection to IP20 and to avoid the risk of
fire in the event of a major internal failure.
WARNING
Grommet kits are available for size 7 to 10 finger guards. For size 8 to 10, two versions are available
allowing for either single or double cable entries.
Table 3-1 Grommet kits
Drive size
Size 7 - Kit of 8 x single entry grommets
Size 8 - Kit of 8 x single entry grommets
Size 8 - Kit of 8 x double entry grommets
Size 9 and 10 - Kit of 8 x double entry
grommets
3.4

Dimensions and mounting methods

Drive sizes 7 to 10 can be either surface or through-panel mounted using the appropriate brackets.
If the drive has been used at high load levels for a period of time, the heatsink can reach
temperatures in excess of 70 °C (158 °F). Human contact with the heatsink should be
prevented.
WARNING
Many of the drives in this product range weigh in excess of 15 kg (33 lb). Use appropriate
safeguards when lifting these models.
A full list of drive weights can be found in Table 5-14 Overall drive weights on page 102.
WARNING
Unidrive M / HS Frame 7 to 10 Power Installation Guide
Issue Number: 5
Part number
3470-0086
3470-0089
3470-0090
3470-0107
Picture
23