Programming Buttons - Helios PD2-6100 Instruction Manual

Helios PD2-6100 Strain Gauge, Load Cell, and mV Meter

Programming Buttons

Lower Door
Panel
Button
•
Press the Menu button to enter or exit the Programming Mode at any time.
•
Press the Right arrow button to move to the next digit during digit or decimal point programming.
•
Press or hold the Up arrow button to scroll through the menus, decimal point, or to increment the value of a digit.
•
Press the Enter button to access a menu or to accept a setting.
•
Press and hold the Menu button for three seconds to access the advanced features of the meter.
MA OUT RELAY1 RELAY2 RELAY3 RELAY4
1 2 3
1 2 3 4 5 6 1 2 3 4 5
C
R I+ I- NC NO C NC NO C NC NO C NC
Description
Menu
Right Arrow/F1
ZERO THE DISPLAY
Remote Buttons
The meter can be operated via a remote control station (PDA2364-MRUE) using the
digital input connections. The PDA2364-MRUE mimics the Helios's four programming
buttons: Menu, Right Arrow, Up Arrow, and Enter.
See Remote Operation of Meter on page 22 for details.
Remote Tare
The Tare feature on the meter may be operated remotely using the PDA2361-T control
station.
See Ordering Information on page 6 for details.
24
SIGNAL
P+/P-
1 2 3 4 5 6
6
10V 5V
F4 COM EX+ SG- SG+EX-
NO
MENU RIGHT UP ACK
F2
F1 F3
RESET
MENU ZERO TARE
Button Description
Up Arrow/F2
RESET TARE
Acknowledge (Enter)/F3
TARE
Instruction Manual
+ -
1 2
POWER
1
2
3
4
5
6
7
8