Pipe Mounting Instructions; Figure 6. Vertical Pipe Mount Assembly; Figure 7. Horizontal Pipe Mount Assembly - Helios PD2-6100 Instruction Manual

Helios PD2-6100 Strain Gauge, Load Cell, and mV Meter

Pipe Mounting Instructions

The meter can also be mounted to a pipe using the
optional pipe mounting kit (PDA6260). This kit
includes two mounting plates, two U-bolts, and the
necessary nuts and bolts. To mount the meter to a
pipe using the pipe mounting kit accessory, follow
these instructions.
•
Secure the mounting plates to the top and bottom
(for vertical pipes) or left and right (for horizontal
pipes) of the reverse side of the meter enclosure
using the provided fasteners.
DO NOT overtighten the fasteners as it could
cause damage to the enclosure.
•
Using the provided nuts and U-bolts, secure the
mounting plates to the pipe applying enough
torque such that the meter cannot be moved up
or down (or side to side).
Mounting Plate
Mounting Plate

Figure 6. Vertical Pipe Mount Assembly

U-Bolt
Back of
Meter
U-Bolt
13
Mounting
Plate
Back of
U-Bolt
Meter
Pipe

Figure 7. Horizontal Pipe Mount Assembly

Instruction Manual
Mounting
Plate
U-Bolt