Quick Installation - Wilson Electronics weBoost DRIVE 4G-X OTR 470210R User Manual

Mobile cellular signal booster kit truck edition
Table of Contents

Advertisement

________

Quick Installation

Remove
Remove
Remove
4G-OTR Antenna
Mount washer with
lip in the UP position
Fasten nut with lip in
the DOWN position
Slim Low
Profile
Antenna
2
1
4G-OTR ANTENNA INSTALLATION
Select a location on one of the mirror rails to mount
the 4G-OTR Antenna that is:
• At least 12 inches from any other antennas.
• Free of obstructions.
• At least 6 inches from any windows
(including sunroofs).
Remove existing nut from mount as shown. Mount
antenna with fi tted disc washer and nut provided in
package. Add included thread lock on all threads.
2
RUNNING ANTENNA CABLE
Run the Outside Antenna cable into the vehicle.
The cable is strong enough that it may be shut in
most vehicle doors without damaging the cable.
For a cleaner look, carefully pull down the door
seal, run the cable under the seal, and push the
seal back into place. This method reduces wear on
the cable as the door opens and closes.
3
INSIDE ANTENNA INSTALLATION
Identify a place on the side of the seat to mount
the Slim Low Profi le Antenna. The location should
be at least 18 inches but no more than 36 inches
from where the cellular device will be used. Peel
off the backing of the Velcro® and attach to seat.
CELL PHONE SIGNAL BOOSTER

Advertisement

Table of Contents
loading

Table of Contents