RISK TO THE VEHICLE. AGAIN, BE SURE TO PLACE YOUR SIGNAL DAYS. BOOSTER IN A LOCATION WITH ADEQUATE VENTILATION AND AWAY FROM DIRECT SUNLIGHT OR MOISTURE. Installation Instructions for the Following Wilson Electronics Signal Boosters: Mobile 4G SmarTech Signal Booster ™...
Package Contents Mobile 4G ™ Mini-Mag Slim Low Profile DC Power Supply Signal Booster Outside Antenna Inside Antenna 6V / 2A 301126 301152 859913 Optional Antennas 12” Mag Mount Marine Outside Antenna Outside Antenna Outside Antenna Trucker 311103 311104-5810 311130-5810 Outside Antenna 311101 Appearance of device and accessories may vary.
Page 4
The outside antenna must be installed • When you have tested the functionality of your Mobile 4G vertically on a metallic surface. Signal Booster, mount the inside antenna by peeling off the backing of the Velcro and attach it to your ®...
Each light indicates the booster. Contact Wilson Electronics operation of its labeled frequency. Take Technical Support Team for assistance. the following steps based on the indicator...
Inside Antenna Expansion Kit Green light: A green light indicates the Mobile 4G Signal Booster is working Kit 309900-50N properly. • 2 - Wall Panel antennas If you have additional questions about • 1 - 50 ohm 3-Way Splitter the operation of your Mobile 4G Signal Kit 309905-50N Booster, please contact the Wilson •...
Connecting the Signal Booster directly to the cell phone with use of an adapter will damage the cell phone. WARNING: Use only the power supply provided in this package. Use of a non-Wilson Electronics product may damage your equipment. WARNING: The Signal Booster unit is designed for use in an indoor, temperature-controlled environment (less than 150 degrees Fahrenheit).
This device complies with Part 15 of FCC rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by Wilson Electronics could void the authority to operate this equipment. Tech Support 866-294-1660 Need help? www.WilsonElectronics.com...
Page 10
Returned Material Authorization (RMA) number supplied by Wilson Electronics. Wilson Electronics shall, at its option, either repair or replace the product. Wilson Electronics will pay for delivery of the repaired or replaced product back to the original consumer if located within the continental U.S.