Wilson Electronics iDEN 800 MHz 274080 Installation Instructions Manual

Wilson Electronics iDEN 800 MHz 274080 Installation Instructions Manual

Advertisement

Quick Links

iDEN 800 MHz
Adjustable Gain
In-Building Wireless
Smart Technology ™
Signal Booster
Contents:
Antenna Options & Accessories . . . . . . . . . . . . . . . . . . . . . . . 1
Quick Install Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Before Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Outside Antenna Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Finding the Strongest Signal . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installing the Inside Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Understanding the Signal Booster Light . . . . . . . . . . . . . . . . 10
Warnings and Recommendations . . . . . . . . . . . . . . . . . . . . . 12
Guarantee & Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
Appearance of device and accessories may vary.
Note: This manual contains important safety and operating information. Please read and
follow the instructions in this manual. Failure to do so could be hazardous and result in
damage to your Signal Booster.
Wilson
®
Electronics, Inc.

Advertisement

Table of Contents
loading

Summary of Contents for Wilson Electronics iDEN 800 MHz 274080

  • Page 1: Table Of Contents

    Installing the Inside Antenna ......8 Installing a Wilson Electronics Signal Booster... . . 9 Powering up a Wilson Electronics Signal Booster .
  • Page 2: Antenna Options & Accessories

    Appearance of device and accessories may vary. To purchase, call Wilson Electronics Sales Department at: 800-204-4104 Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 or email: tech@wilsonelectronics.com. Hours: 7 am to 6 pm MST.
  • Page 3: Installation Diagram

    Before Getting Started Before Getting Started This guide will help you properly install your Wilson Electronics Signal This guide will help you properly install your Wilson Electronics Signal Booster. It is important to read through all of the installation steps Booster.
  • Page 4: Outside Antenna Installation

    Make of getting the strongest signal is to have one person on the roof to rotate Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 or email: tech@wilsonelectronics.com.
  • Page 5: Installing The Inside Antenna

    (859981) exterior of your home or office. Then drill a hole through the wall where you Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 or email: tech@wilsonelectronics.com. Hours: 7 am to 6 pm MST.
  • Page 6: Installing A Wilson Electronics Signal Booster

    If you are happy with the coverage area in your building, then you are done. Blinking will stop after the 15 minute installation 6. Contact Wilson Electronics Technical Support Team with any questions at period. If you require increased coverage area, set both gain controls to 866-294-1660 or email tech@wilsonelectronics.com.
  • Page 7: Warnings And Recommendations

    15 minute installation period, if the unit is powered up and working properly. Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 or email: tech@wilsonelectronics.com. Hours: 7 am to 6 pm MST.
  • Page 8 However, no responsibility is assumed by Wilson Electronics, Inc. for any business or personal losses arising from its use, or for any infringements of patents or other rights of third parties that may Wilson Electronics Signal Boosters feature patented Smart Technology ™...
  • Page 9 iDEN 800 MHz Specifications iDEN 800 MHz Specifications Model Number 274080 Antenna connectors N-Female Antenna impedance 50 Ohms Dimensions 5.7 x 4.2 x 1.5 inch (14.0 x 10.8 x 3.9 cm) Weight 1.27 lbs (0.544 kg) Frequency 806-821 MHz / 851-866 MHz Passband Gain (nominal) 70 dB Typical, 75 dB Maximum...

Table of Contents