Table of Contents
Advertisement
Quick Installation Overview
The following steps provide a summary of the Signal Booster/antenna installation process .
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 .
1 .
Select a location to install the Signal Booster that is away from excessive heat, direct
sunlight, moisture and that has proper ventilation . Do not place the Signal Booster in
an air-tight enclosure .
2 .
Select a location on the top of the structure to install the Outside Antenna . Use a cell
phone in test mode to find the strongest signal from the cell tower . Visit
www.WilsonElectronics.com to find test mode function for your particular cell phone .
3 .
Run the Outside Antenna cable to the Signal Booster and attach it to the connector
labeled "Outside Antenna ."
4 .
An external adapter is required to connect the cell phone or cellular data card to the
Signal Booster . The external adapter plugs into the included antenna extension cable
and directly into a socket on the cellular device . Run the extension cable from the
external adapter and attach it to the connector labeled "Inside Antenna" on the Signal
Booster .
Note: Be careful when plugging the connector in so as not to bend the center pins on
the connectors. Ensure all cables have a tight connection.
5 .
Before powering up the Signal Booster verify that both the Outside Antenna and the
Inside Antenna are connected and check that all connections are tight . An AC surge
protector is recommended for all installations (not included) .
Installation Diagram
(Figure 1)
Cellular Modem
GSM Hi-Power
Signal Booster
Power Supply
Powerstrip Surge Protector
NOTE: It is very important to power your Signal Booster using a surge protected AC Power Strip with at least a 1000 Joule rating.
Failure to do this will void your warranty in the event of a power surge or lightning strike.
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: tech@wilsonelectronics.com
Mini-Magnet
Antenna
Mon.- Fri. Hours: 7 am to 6 pm MST.
2
Advertisement
Table of Contents
