Mitsubishi Electric MELSEC iQ-F FX5 User Manual page 109

■PDO mapping setting
• When using a Motion module, PDO mapping setting is not required as the PDO mapping is fixed to the external signal of
the servo amplifier.
■Servo parameter setting
• Set the servo parameters. For the setting details, refer to the following.
Page 108 Servo parameter setting value when using MR-J5(W)-G
Double click the servo amplifier icon or [Detail Setting] in "Parameter Automatic Setting"
Downloaded from ManualsNet.com
When setting the MR-J5(W)-G series,
confirm that there is a check in the
[Motion Control Station] checkbox.
When setting is complete, close the
screen to update the parameters.
search engine
Appendix 9 Setting Example for Motion Modules (FX5-SSC-G)
A
APPX
107