Mitsubishi Electric MELSEC iQ-F FX5 User Manual page 19

Part names [FX5-SSC-G]
This chapter describes the part names of the FX5-SSC-G.
[3]
[2]
[1]
[11]
No. Name
[1] Modular jack (RJ45)
(with cap)
[2] Extension cable
[3] Direct mounting hole: 2 holes of 4.5 (0.18") (mounting screw:
M4 screw)
[4] POWER LED
[5] RUN LED
[6] ERROR LED
[7] Extension connector
[8] DIN rail mounting groove
[9] Rating plate
[10] DIN rail mounting hook
[11] Pullout tab
[12] Power supply connector
Downloaded from ManualsNet.com
2-I4.5 Mounting hole
[4]
[5]
[6]
[7]
[12]
search engine
Description
A port used to connect to CC-Link IE TSN. Connect an ethernet cable to this port.
For the wiring and precautions when wiring, refer to the following.
Page 62 Wiring [FX5-SSC-G]
Connects to a CPU module, etc.
Holes which are used when installed directly.
For details, refer to the following.
Page 19 LED display specifications [FX5-SSC-G]
Connects to an expansion module on the next tier.
Using this slot, the module can be mounted to DIN rail "DIN46277" (width: 35 mm
(1.38 inch)).
Serial No. etc., are printed.
Hook which is used for mounting the module onto the DIN rail.
Tab for removing from a CPU module, etc.
Connects a module to the power.
[8]
[9]
[10]
1 PART NAMES
1
17