Mitsubishi Electric MELSEC iQ-F FX5 User Manual page 10

[OPERATION PRECAUTIONS]
CAUTION
● Construct an interlock circuit in the program so that the whole system always operates on the safe
side before executing the control (for data change) of the PLC in operation. Read the manual
thoroughly and ensure complete safety before executing other controls (for program change,
parameter change, forcible output and operation status change) of the PLC in operation. Otherwise,
the machine may be damaged and accidents may occur by erroneous operations.
[DISPOSAL PRECAUTIONS]
CAUTION
● Please contact a certified electronic waste disposal company for the environmentally safe recycling
and disposal of your device.
● When disposing of batteries, separate them from other waste according to local regulations. For
details on the Battery Directive in EU countries, refer to the user's manual (Hardware) of the CPU
module to use.
[TRANSPORTATION PRECAUTIONS]
CAUTION
● When transporting the PLC with the optional battery, turn on the PLC before shipment, confirm that
the battery mode is set using a parameter and the BAT LED is OFF, and check the battery life. If the
PLC is transported with the BAT LED ON or the battery exhausted, the battery-backed data may be
unstable during transportation.
● The PLC is a precision instrument. During transportation, avoid impacts larger than those specified in
the general specifications by using dedicated packaging boxes and shock-absorbing palettes. Failure
to do so may cause failures in the PLC. After transportation, verify operation of the PLC and check for
damage of the mounting part, etc. For details on the general specifications, refer to the user's manual
(Hardware) of the CPU module to use.
● When transporting lithium batteries, follow required transportation regulations. For details on the
regulated products, refer to the user's manual (Hardware) of the CPU module to use.
● When fumigants that contain halogen materials such as fluorine, chlorine, bromine, and iodine used
for disinfecting and protecting wooden packaging from insects, they cause malfunction when entering
our products. Please take necessary precautions to ensure that remaining materials from fumigant do
not enter our products, or treat packaging with methods other than fumigation (heat method).
Additionally, disinfect and protect wood from insects before packing products.
8
Downloaded from ManualsNet.com search engine