Aggregation - Static Aggregation - ZyXEL Communications RGS Series User Manual

5.3.41 Aggregation – Static Aggregation
This page is used to configure the
Object
Hash Code Contributors
Source MAC Address
Destination MAC
Address
IP Address
TCP/UDP Port Number
Aggregation Group Configuration
Group ID
Port Members
Aggregation hash mode and the aggregation group.
The Source MAC address can be used to calculate the destination port for the frame.
Check to enable the use of the Source MAC address, or uncheck to disable. By
default, Source MAC Address is enabled.
The Destination MAC Address can be used to calculate the destination port for the
frame. Check to enable the use of the Destination MAC Address, or uncheck to
disable. By default, Destination MAC Address is disabled.
The IP address can be used to calculate the destination port for the frame. Check to
enable the use of the IP Address, or uncheck to disable. By default, IP Address is
enabled.
The TCP/UDP port number can be used to calculate the destination port for the frame.
Check to enable the use of the TCP/UDP Port Number, or uncheck to disable. By
default, TCP/UDP Port Number is enabled.
Indicates the group ID for the settings contained in the same row. Group ID "Normal"
indicates there is no aggregation. Only one group ID is valid per port.
Each switch port is listed for each group ID. Select a radio button to include a port in
Description
101