Dhcp Snooping Table - ZyXEL Communications RGS Series User Manual

5.4.13 DHCP Snooping Table

Each page shows up to 99 entries from the Dynamic DHCP snooping table, default being 20, selected through
the "entries per page" input field. When first visited, the web page will show the first 20 entries from the
beginning of the Dynamic DHCP snooping Table.
The "MAC address" and "VLAN" input fields allow the user to select the starting point in the Dynamic DHCP
snooping Table. Clicking the
next Dynamic DHCP snooping Table match. In addition, the two input fields will - upon a
click - assume the value of the first displayed entry, allowing for continuous refresh with the same start address.
The will use the last entry of the currently displayed table as a basis for the next lookup. When the
end is reached the text "No more entries" is shown in the displayed table. Use the
over.
Object
MAC Address
VLAN ID
Source Port
IP Address
IP Subnet Mask
DHCP Server Address
button will update the displayed table starting from that or the closest
User MAC address of the entry.
VLAN-ID in which the DHCP traffic is permitted.
Switch Port Number for which the entries are displayed.
User IP address of the entry.
User IP subnet mask of the entry.
DHCP Server address of the entry.
Buttons
Check this box to refresh the page automatically. Automatic refresh occurs every 3
seconds.
Refreshes the displayed table starting from the input fields.
Flushes all dynamic entries.
Updates the table starting from the first entry in the Dynamic DHCP snooping Table.
Updates the table, starting with the entry after the last entry currently displayed.
Description
button
button to start
185