Vlans - Vlans Membership - ZyXEL Communications RGS Series User Manual

5.4.50 VLANs – VLANs Membership
Each page shows up to 99 entries from the VLAN table (default being 20), selected through the "entries per
page" input field. When first visited, the web page will show the first 20 entries from the beginning of the VLAN
Table. The first displayed will be the one with the lowest VLAN ID found in the VLAN Table.
The "VLAN" input field allows the user to select the starting point in the VLAN Table.
Clicking the
match.
The will use the last entry of the currently displayed VLAN entry as a basis for the next lookup. When
the end is reached, the text "No data exists for the selected user" is shown in the table. Use the
to start over.
Object
VLAN User
VLAN ID
Port Members
230
button will update the displayed table starting from that or the closest next VLAN Table
Various internal software modules may use VLAN services to configure VLAN
memberships on the fly.
The drop-down list on the right allows for selecting between showing VLAN
memberships as configured by an administrator (Admin) or as configured by one of
these internal software modules.
The "Combined" entry will show a combination of the administrator and internal
software modules configuration, and basically reflects what is actually configured in
hardware.
VLAN ID for which the Port members are displayed.
A row of check boxes for each port is displayed for each VLAN ID.
If a port is included in a VLAN, the following image will be displayed:
If a port is in the forbidden port list, the following image will be displayed:
If a port is in the forbidden port list and at the same time attempted included in the
VLAN, the following image will be displayed:
VLAN in this case.
Select VLAN Users from this drop down list.
Check this box to refresh the page automatically. Automatic refresh occurs every
3 seconds.
Click to refresh the page immediately.
Description
. The port will not be a member of the
Buttons
button