ZyXEL Communications RGS Series User Manual page 46

Object
ID
Description
Enabled
Disabled
Note: When any alarm exists, the Alarm LED will be on (lighted), Alarm Output Relay will also be
enabled.
46
The identification of the Alarm Profile entry.
Alarm Type Description.
If alarm entry is Enabled, then alarm will be shown in alarm history/current when it
occurs.
Alarm LED will be on (lighted), Alarm Relay also be enabled.
SNMP trap will be sent if any SNMP trap entry exists and enabled.
If alarm entry is Disabled, then alarm will not be captured/shown in alarm
history/current when alarm occurs;
then it will not trigger the Alarm LED change, Alarm Relay and SNMP trap either.
Buttons
Click to apply changes.
Click to undo any changes made locally and revert to previously saved values.
Description